Off Road Only SwayLOC for Jeep Wrangler JK remote control


SKU: SL-JKRC Category:


This is the remote controlled version of SwayLOC» for Jeep¬ Wrangler» JK. SwayLOC» is the original dual-rate swaybar that provides different control rates for off-road and on-road use. SwayLOC» improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock swaybar. The dual rates are achieved through the use of two concentric torsion bars. SwayLOC» uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground. The proven cam latching system guarantees that SwayLOC» engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch. The remote controlled version works using an air operated latch1. The latch is controlled by an in-cab switch or automatically when equipped with AiROCK»2. Turning on the lighted in-cab toggle switch automatically sets the latch to engage for high on-road resistance. Turning it off sets it to disengage for low off-road resistance. This kit comes with aluminum brackets to mount SwayLOC» in the stock swaybar location. Some aftermarket bumpers or skid plates might require modifications to allow clearance for SwayLOC». A multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10″. Note… 1. JK’s with Rubicon Express or other manufacturers aftermarket front track bar relocation brackets might interfere with the driver side SwayLOC» arm. 2. Requires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.
3. AiROCK» control requires the purchase of the SwayLOC» AiROCK» remote control kit (SL-ARRCK).

Additional information

Weight 70 lbs
Dimensions 49 x 7 x 7 in